MDT10P716

2021-03-02 10:42:01 fandoukeji

MDT10P716


概述

1. General Description
This EPROM-Based 8-bit micro-controller uses a
fully static CMOS technology process to achieve
higher speed and smaller size with the low power
consumption and high noise immunity. On chip
memory includes 2K words of ROM, and 128
bytes of static RAM.
2. Features
The followings are some of the features on the
hardware and software:
? Fully CMOS static design
? 8-bit data bus
? On chip EPROM size: 2.0 K words
? Internal RAM size: 128 bytes
? 37 single word instructions
? 14-bit instructions
? 8-level stacks
? Operating voltage:2.5V~5.5V(PRD disable)
4.5V~5.5V(PRD enable)
? Operating frequency: DC ~ 20 MHz
? The most fast execution time is 200 ns
under  20MHz  in  all  single  cycle
instructions except the branch instruction
? Addressing modes include direct, indirect
and relative addressing modes
? Power-on Reset
? Power edge-detector Reset
? Power range-detector Reset
? Sleep Mode for power saving
? Capture, Compare, PWM module
? 7 interrupt sources:
-External INT pin
-TMR0 timer, TMR1 timer, TMR2 timer
-A/D conversion completion
-PortB<7:4>interrupt on change
-CCP
? A/D converter module:
-4 analog inputs multiplexed into one A/D
converter
-8-bit resolution
? TMR0: 8-bit real time clock/counter
TMR1: 16-bit real time clock/counter
TMR2: 8-bit clock/counter
? 4 types of oscillator can be selected by
programming option:
RC-Low cost RC oscillator
LFXT-Low frequency crystal oscillator
XTAL-Standard crystal oscillator
HFXT-High frequency crystal oscillator
? On-chip RC oscillator based Watchdog
Timer (WDT)
? 13 I/O pins with their own independent
direction control
3. Applications
The application areas of this MDT10P716
range from appliance motor control and high
speed auto-motive to low power remote
transmitters/receivers, pointing devices, and
telecommunications  processors,  such  as
Remote controller, small instruments, chargers,
toy, automobile and PC peripheral … etc.


首页
产品
新闻
联系